main deformation meaning in Chinese
治变
Examples
- When ct20 alloy was tensioned at 20k , the main deformation mechanism in equiaxed microstructure was the slip of dislocations , and in bimodal microstructure the slip of dislocations and a small amount of twinning and in lamellar microstructure a large amount of twinning
Ct20合金20k拉伸变形时，等轴组织主要是位错的滑移起主导作用，双态组织除了位错滑移外还有少量的变形孪晶产生，片状组织中则能观察到数量较多的孪晶。 - Firstly , the main deformation and destruction forms of high loess slope and its deformation and destruction mode are brought forward . the forms are : collapse , slumping , slope wash , slope peeling , sliding mass deformation by collapsibility , and a very little seen form : mudflow
根据野外调查和前人的研究资料，概括总结出黄土高边坡有如下几种破坏形式：滑塌、崩塌、坡面冲刷、坡面剥落掉块、坡体湿陷变形以及并不多见的泥流。 - The apparent activation volume calculated by the model is about 2500a3 , which was ten times larger than that of usual amorphous alloy and was at the same range of the amorphous polymer . the model shows the main deformation mechanism of nanocrystalline ag is grain boundary sliding , which in some extent declares the similar forms of equation with amorphous alloys . with the ananlysis to the hrem of nanocrystalline ag , the discrepancy of the apparent activation volume between the nanocrystalline ag and amorphous alloys is interpreted by the loss of atoms participating in grain boundary sliding without enough reconstruction by the movement of atoms under the low temperature
运用晶界滑移的热激活理论对压缩实验结果进行了数值拟合，拟合曲线与实验数据符合很好，得到了晶界滑移的表观激活体积(热激活基本单位体积与局域瞬态应变的乘积) ，约为2500a ~ 3 ，先当于几十个原子体积大小的瞬态变化，约为非晶合金的10倍以上，与非晶高聚物的表观激活体积相当。